| |
BeTwin VS and WinConnect Server VS version 2.00.368 or later support Windows Vista SP1. If you are using earlier version of BeTwin VS or WinConnect Server VS, you will need to upgrade to BeTwin VS or WinConnect Server VS version 2.00.368 or later.
|
| Installation Note: |
|
 |
After upgrading to Windows Vista Service Pack 1, you will need to
uninstall the current BeTwin software (even though you may have installed
the latest BeTwin software version), restart Windows, re-install with the
latest BeTwin software version and run Configuration Wizard to re-setup the
Host and Station(s).
Note: You may need to re-register BeTwin again using the same primary
serial number that was originally registered on the same PC as the
installation of Windows Vista SP1 may have affected the BeTwin licensing.
|
|
 |
After upgrading to Windows Vista Service Pack 1, you will need to
uninstall the current WinConnect Server VS software (even though you may
have installed the latest WinConnect Server VS software version) and restart
Windows.Make sure that the Windows native remote desktop feature is working
properly before you proceed to re-install with the latest WinConnect Server VS software
version.
Note: You may need to re-register WinConnect Server VS again using the
same primary serial number that was originally registered on the same PC as
the installation of Windows Vista SP1 may have affected the WinConnect Server VS
licensing.
|
|
| |
|